Finished Planck KeyboardAfter building the macro pad I jumped right into building a Planck. The Planck is a 40% ortholinear keyboard and there are files available on Thingiverse to print your own case and plate to build one. I used a case from mesohuannny and a plate from furfoxsake. They were both easy to print, but I had to increase the height of the case a bit to accommodate my messy bundle of wires. ...
Handwired 2×5 Macro Pad with 3D-Printed caseWhile on lockdown for COVID-19 I decided it was the perfect time to build my first hand-wired mechanical keyboard and that starting small was the right way to begin. After much searching and thinking I chose a [2×5 case](https://www.thingiverse.com/thing:2509293 noreferrer) that I found on ThingiVerse by [Jacob Jaeggli (jakebot)](https://www.thingiverse.com/jakebot/about noreferrer) and with [Kailh BOX Heavy Burnt Orange Switches](https://cdn.shopify.com/s/files/1/3099/8088/files/BOX_Burnt_Orange.pdf?5816470357010718290 noreferrer) and a quick trip to Microcenter for a Teensy 2.0 Arduino board and diodes I got started. ...
I attended the Mechanical Keyboard Meetup at the Vintage Computer Festival Southeast (VCFSE) in Roswell Georgia. I have attended the VCF a couple of times in the past and it has always been interesting. Getting to see and touch computer from my childhood and before is a lot of fun, and even better, many of them are in working order and available to play with. Typing on a Commodore 64 brought back a lot of good memories. Typing on the Atari 400 chiclet keyboard, not so much. ...
My office desk with the Tex Yoda 2 I cannot say enough good things about the Tex Yoda 2. I am totally in love with it. Price Let’s start with how ridiculously expensive it is, actually let’s not and just say that it is more expensive than most would pay for a really nice keyboard and mouse. You can get an RGB Pok3r and a Logitech G502 for a lot less than the Yoda 2, and you probably should. But once I touched the Yoda 2 and did some typing on it I fell in love, and you can’t put a price on true love. ...
The storefront for Mechanical Keyboards in Fairview Tennessee After ordering the Pok3r from Mechanical Keyboards I realized that they were located just outside of Nashville Tennessee, like a 4-hour drive from me, so when I got the chance to take a day off I headed out. Arriving at their storefront at 9:30 am on Monday morning I was greeted by Lee who spent a lot of time with me showing me a lot of different keyboards and answering my questions, and boy did I have a lot of questions. ...
After using the Cooler Master Ten-Key-Less (TKL) keyboards for a while, I decided to take it to the next level, and the POK3R really is something completely different. The Limited Edition RGB LED Black Pok3r keyboard is a great 60% keyboard with almost of all the features a mechanical keyboard enthusiast would want. I didn’t really like the Cherry MX Blue or Brown switches very much. The clicky noise of the blues overwhelms my senses and makes me nervous, the clicky-ness does help hide the mushiness of the tactile bump. The tactile-ness of the browns feels very mushy to me, I would prefer the tactile bump to be really short and sharp. With all that in mind I wanted to go with a linear switch and see how that felt. ...
There are an overwhelming number of different switches for mechanical keyboards available. Linear, tactile, clicky, buckling spring, vintage, and each in a wide range of spring weights and crispness. From Novel Keys I ordered a 25 slot switch tester with a selection of Cherry MX, MOD, Gateron, and Zealio switches along with a Kailh Sample Pack of another 27 switches. Then from Thingiverse I printed out a PLANCK keyboard frame with room for 48 switches. Now I have a switch tester that I can take around and really get a feel for a wide range of the current switches available. ...
If you read my review of the 2016 MacBook Pro you know how much I dislike the keyboard on it. Along with that I have been reading Norman Chan on Tested.com, co-workers, gaming sites, and “computer experts” talking mechanical keyboards and how wonderful they are, my interest was piqued. My goal for a keyboard is for it to be comfortable and to give a reliable amount of feedback for my not-so-fast touch typing. I don’t need it for “gaming” or a crazy amount of n-key rollover. Just something solid, reliable, and comfortable. I would have loved to build a keyboard kit with all the soldering and programming that entails, but I have other things I would rather be doing. So I spent months shopping and comparing every mechanical keyboard I could lay my hands on. ...